●Kwashin na confetti yana cinyewa tare da silinda mai ƙarfi mai ƙarfi.Kuna buƙatar amfani da cahertridge na confetti kawai lokacin da kuke amfani da ƙaddamar da confetti.Ba kwa buƙatar haɗa tanki na CO2 kamar na'urar fashewar confetti zuwa ƙarin ayyuka da ɗaukar ƙarin sararin taron ko yin amfani da injin fan-confetti tare da ƙarar girma, wanda zai adana ƙarin sarari kuma ya rage hayaniya don taron ku.
●An inganta motherboard na na'urar don bin diddigin, ta yadda za a fesa dakika na gaba idan an aika da umarnin harbe-harbe, guje wa jinkirin allura da rasa lokacin ƙaddamarwa mafi kyau.
●Zaku iya zaɓar tsayin 40cm / 60cm / 80cm gaisuwa da nau'in nau'in nau'i na confetti bisa ga ƙayyadaddun ayyuka. Kunshin ba ya haɗa da harsashi na lantarki na lantarki, Ƙaƙwalwar siyar da wutar lantarki yana cikin wannan samfurin A + daki-daki, za ku iya. nemo shi ,Tasirin sakin ya bambanta.Tsawon harsashin confetti za a fesa mafi girma da ƙarin takarda na kafeti.
Wannan na'ura na confetti na iya amfani da kintinkiri mai launi ko takarda mai launi, ana ba da shawarar yin amfani da ribbon mai launi, kuma ana fesa ribbon mai launi a babban matsayi.
Takarda launi 6-10 mita, ribbon fesa mita 8-12.
Da farko, saka bututun hauhawar farashin kaya a cikin injin daskarewa, dakatar da hauhawar farashin kaya lokacin da ma'aunin matsin lamba ya nuna 15-20kg (1.5-2Mpa),
Sa'an nan kuma sanya confetti takarda a cikin bututun aluminum, kunna wuta kuma kunna ramut don ƙaddamarwa.
Saka kamar 0.1-0.2kg confetti takarda a lokaci guda, sanya kusan guda 24 na ribbon masu launin 2cm*5m
Ana iya sarrafa injin ta hanyar sarrafawa ta ramut.
Tsawon fesa: 6-12 mita
Wutar lantarki: AC110V-220V, 60Hz/50Hz
Matsakaicin ƙarfi: 60W
Sarrafa: DMX 512/M
Tashar DMX: 4
NW: 3.0KG
GW: 3.5KG
Girman samfur: 36x12x22cm
Girman Shiryawa (Katon):38x17x24.5cm
Abun ciki: Igiyar Wuta, Igiyar DMX
Mun sa abokin ciniki gamsuwa a farko.